The table below shows the dimensions, weight, appearance and typical uses for the full range of reinforcing materials in the WEST SYSTEM® product range.

Product code	Length (m)	Width (mm)	Thickness (mm)	Fibre Orientation	Weight (g/m²)	Warp (%)	Weft (%)	Cured Appearance	Uses
Graphite Fibres
701B	204m	25	–	0o	–	100	0	Black	For adding strength to specific areas on centreboards, rudders, masts and models, etc.
Episize™ Biaxial Glass Tape
727A	5m	125	0.4	+45o	450	–	–	Not clear	For use in taping seams, joints and small repairs.
727B	90m
Episize Plain Weave Glass Tape
729A	10m	25	0.17	0o/90o	175	50	50	Almost clear	For use in taping seams and joints.
729B	50m
730A	10m	50
730B	50m
731A	10m	75
731B	50m
732A	10m	100
732B	50m
733A	10m	150
733B	50m
Episize Biaxial Glass Fabric
736-5	5m	1265	0.28	+45o	300	–	–	Almost clear	General purpose fabric for use in sheathing, repair, in mould laminating, etc.
736-10	10m
736-25	25m
736-50	50m
738-5	5m	1250	0.6	+45o	610	–	–	Not clear
738-10	10m
738-25	25m
738-50	50m
739-5	5m	1250	0.4	+45o	450	–	–	Not clear
739-10	10m
739-25	25m
739-50	50m
739-135	50m	270
739-500	50m	500
Episize Glass Cloth
740-5	5m	1000	0.16	0o/90o Plain Weave	135	50	50	Clear	For use in sheathing lightweight structures such as canoes and models.
740-10	10m
740-25	25m
740-50	50m
740-100	100m
741B	1m	1000	0.19	0o/90o Plain Weave	200	50	50	Clear	For use in general sheathing work on hulls and decks, etc.
741-5	5m
741-10	10m
741-25	25m
741-50	50m
741-100	100m
742-5	5m	1200	0.19	0o/90o Twill Weave	200	50	50	Clear	For use in general sheathing work on hulls and decks, has good drapability.
742-10	10m
742-25	25m
742-50	50m
742-100	100m
743-5	5m	1000	0.22	0o/90o Satin Weave	280	52	48	Clear	For use in general sheathing and re-laminating work and general repairs to boat structures. Very good drapability
743-10	10m
743-25	25m
743-50	50m
743-100	100m
746-5	5m	1250	0.22	0o/90o Woven Weave	260	50	50	Clear	General purpose economic glass cloth
746-10	10m
746-25	25m
746-50	50m
746-100	100m
Unidirectional Carbon Tape
702-5	5m	50	0.4	0o	330	100	0	Black	For improving the tensile and compressive strength and stiffness in one direction
702-10	10m
702-50	50m
703-5	5m	75
703-10	10m
703-50	50m
Woven Carbon Tape
706-5	5m	50	0.37	0o/90o	232	50	50	Black	Ideal for adding improved tensile and compressive strength to localised areas
706-10	10m
706-50	50m
707-5	5m	75
707-10	10m
707-50	50m
Woven Aramid Tape
715-5	5m	50	0.39	0o/90o	200	50	50	Yellow	Provides abrasive and tear resistance in addition to good impact resistance
715-10	10m
715-50	50m
716-5	5m	75
716-10	10m
716-50	50m
Plain Weave Carbon Fabric
760-1	1m	1000	0.3	0o/90o	200	50	50	Black	Provides improved tensile and compressive strength to laminates
760-5	5m
760-10	10m
760-50	50m
760-100	100m
Twill Weave Carbon Fabric
765-1	1m	1000	0.28	0o/90o	200	50	50	Black	Provides improved tensile and compressive strength to laminates
765-5	5m
765-10	10m
765-50	50m
765-100	100m
767-1	1m		0.38		285
767-5	5m
767-10	10m
767-50	50m
767-100	100m
Hybid Fabric
777-1	1m	1000	0.3	0o/90o	188	50	50	Black/Yellow	Combines the stiffness of carbon with the impact and abrasion resistance of aramid
777-5	5m
777-10	10m
777-50	50m
777-100	100m
Aramid Fabric
787-1	1m	1000	0.47	0o/90o	300	50	50	Yellow	Provides good impact resistance to laminates
787-5	5m
787-10	10m
787-50	50m
787-100	100m